ZETSAW Compass Japanese Pull Saw – Curve & Circle Cutting Saw

• Cuts tight curves and circles — Built for the cuts a straight saw can't make: circles, tight radii, and curved lines in sawn wood, plywood, and laminated wood.
• Starts a cut in the middle of a board — Pocket cutting means you don't need to work in from an edge.
• Three blade lengths — 80mm, 150mm, and 210mm. Shorter blades give tighter control on small radii; longer blades reach further into a cut.
• 16 TPI teeth, 0.90mm thick — A 1.60mm tooth pitch on a stiff blade, the same across all three sizes.
• Ni-P plated blade — The blade carries a nickel-phosphorus plating.
• Impulse-hardened teeth — ZETSAW was one of the first makers to adopt impulse-hardening, a heat treatment that keeps the teeth sharp longer. The teeth can't be resharpened, but the blade is replaceable.
• Made by Okada Hardware Mfg. Co., Ltd. — A Japanese saw maker founded in 1943, producing ZETSAW saws for professionals and everyday users alike.
• Ships from U.S. stock — In stock in California. No overseas wait, no customs.

SPECS
Blade Lengths: 80mm (3.1") / 150mm (5.9") / 210mm (8.3")
Pitch: 1.60mm (16 TPI) — all sizes
Blade Thickness: 0.90mm — all sizes
Cutting: Curve cut, circle cut, pocket cut
Material: Sawn wood, plywood, laminated wood
Blade Finish: Ni-P plated
Replacement Blades: 80mm → No. 30207 / 150mm → No. 30208 / 210mm → No. 30209